Simple and strong hot tub base pad ideas that is good for your hot tub. This leaves room for things like opening the cover.
Confer sp3248 8 x 8 foot handi spa hot tub deck foundation plastic.
How to build a hot tub platform. The gravel will conform to the shape of the bottom of your tub to hold it firmly in place. Fill the hole with gravel and press it down to make sure it will not shift or sink once it has weight on it. How to build a diy hot tub spa deck platform cheap with pallets & a small budget.
Replace each stake with hole that's 1 foot deep, and fill the holes with a few inches of sand. Then fill the excavation with gravel and level. Return the tub to its new, level platform.
A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover. Once the plastic tiles are in place, fill with gravel before installing the hot tub.
The second is to build a deck strong enough to support the weight of a hot tub filled with water and people enjoying themselves. The first is to take an 8 foot (2.4 meters) by 8 foot (2.4 meters) section of lawn out and dig down past the sod to undisturbed soil. As with the gravel base, i would lay the water permeable landscaping cloth to stop weeds growing.
The easiest way to construct a hot tub platform is to pound stakes at the corners of an 8 by 8 foot square. Cut and attach exterior grade plywood to the wood shims with screws. Successful hot tub planning professional deck builder.
Insert them every foot or so across the low end of the tub base. Tips for creating a custom hot tub pad the cover guy. Gravel base dig out an area several inches deep and make sure the ground at the bottom is pressed flat.
How do you build a platform for a hot tub? Make a smaller square of 9 stakes in the middle.