The wireless light only comes on when there's a problem, so it should be off. When trying 5ghz, wait, wait, try connect and suddlenly, close all wifi options, unistall wifi driver (ax200) and i have to reset windows.
All your devices will still automatically connect to the original ssid name, which will be the 2.4ghz.
How to connect to 5ghz wifi bt. Use phone b to connect the hot spot and open netvue. After a few minutes you should see two bt hub ssids in the list of networks on your device. Unfortunately there’s no easy way to get this information.
Make sure you have a dual router set to 5ghz. Open the device manager window using the above mentioned steps. For example, an iphone 6 plus connected to a bt home hub 5 via 802.11n on 5ghz won’t be able to see a google nexus player which connects to the same router on 2.4ghz.
They're on the back of your hub. I have a reolink argus 2 cctv camera that can only connect to 2.4ghz, which works fine with my bt hub as i've separated the two channels and connected it. There is no option please help.
Check your bt hub is switched on. • i f you’re unable to connect using method 2, check you have selected the correct wireless network and you’ve entered the correct wireless key. If you are able to reconnect to wifi by manually putting in wifi password, your wifi password is correct.
Does anyone know if the wifi on these can be split into the two separate 5ghz & 2.4ghz channels, like you can on the bt hub? The wireless light only comes on when there's a problem, so it should be off. Open the hot spot on phone a.
By splitting your network, you'll create a second visible network name for the 5ghz band. If that doesn't help, a cheaper option than a bt wireless hotspot would be to buy a dual band wireless dongle for a few pounds and install that on. Open bt option, open wifi open, 2.4ghz and 5ghz works.
Change the 'wireless ssid' to a new name (we recommend just adding '5ghz' to the end of the existing ssid name so you'll know which one is which) click apply to save the changes ; As from 3 days ago when virgin was doing some update in edinburgh none of my devices can connect to 5ghz. (let the camera connected to the hotspot wifi) 2.
It'll be that the hub has band separation switched off. Steps in method 2, pleaseto connect without using the wps button. I have done a reset and disabled the optimisation but still cant connect.
This is off by default. We found an instruction online and hope this could help: (we recommend just adding '5ghz' to the end of the existing ssid name so you'll know which one is which) click apply;
On your smartphone or laptop, you’ll see the separate ssid names. They're on the back of your hub. Go to your rt and then do the procedure to connect your rt control panel to your wifi.
Change the wireless ssid to a new name. If don’t have access to the router or wifi network, then you might not have much control over which wifi frequency band your device connects to. Change 'sync with 2.4 ghz' to no;
I can see ssid but when i try to connect it keeps requesting. Check your bt hub is switched on. Tab + icon to add the device on phone b.
After a few minutes you should see two bt hub ssids in the list of networks on your device. Click on the wireless channel box for the wireless band you want to. Make a note of your hub's wireless network name and password.
How to find out if your laptop supports 5ghz. Make a note of your hub's wireless network name and password. If still failed, please change another wifi or another phone (used as hotspot).
In order to force a device to use one specific band then you need to switch band separation on. Have a samsung a12 and it states it support both 2.4 & 5ghz.hpwever i can't connect it to the 5g.i went onto my bt hub &on the wifi it shows my phone is connected to the 2.4 but i don't know how to change it to the 5. For instance, on the bt hub (various models), you'll first want to open a new browser window then type 192.168.1.254 into the address bar at the.
I did not install new software. With the wireless bands split, you can now customise your wireless settings. The bt home hub has an option to separate out the 2.4 and 5 ghz bands.
When it is off then the device and router will do their own thing as to which network they connect to. Your rt control panel will stay connected to wifi. Select the one you appropriately named for 5ghz band and connect to it.
Has anyone else but me finding they cannot connect to the 5ghz on the superhub3. Though 5ghz networks can be present without causing interference, the elemnt can not connect to 5ghz wireless networks directly.